User manual UlangoTV: Installation

Requirements:
Installation must be on a device with the Android operating system.
Version> = 4.2.2

Also the derivative Amazon Fire is supported. Likewise, Android TV systems like Sony Bravia or Phillips and of course Nvidia Shield.

Preparations:

  • Deinstall any older version of the app that may still be present before installation
  • Allow in the settings to load from unknown sources
  • Register on ulango.tv with email and password or via Facebook or Google Login.

Download from the Google Play Store: Currently there is only the free version of UlangoTV Free IPTV in the Play Store. Installation of this version on Android TV via Play Store is currently not possible.

Download for all other versions and devices: If you want to download the Premium Plus version UlangoTV EPG-IPTV, or if you want to install on an Amazon Fire TV or an Android TV, you must do so from our website ulango.tv. The procedures are slightly different depending on the device, but the URL is always the same:

UlangoTV Free IPTV: http://ulango.tv/uploads/free.apk
UlangoTV+ EPG-IPTV: http://ulango.tv/uploads/plus.apk

SmartPhones, tablets and Android boxes typically have a browser, e.g. Chrome, available. In that one of the above URLs can easily be entered for a download. After the download, you will be asked if you want to install. Basically, versions with the same name and different version have to be deinstalled beforehand.

In all other cases downloading with the Downloader app (from AFTVnews.com) is the easiest. Download this helper application from the Google Play Store (search for downloader aftv) if you’re using Android TV or from the Amazon Store if you’re on a Fire TV stick or box (https://www.amazon.de/AFTVnews-com-Downloader/dp/B01N0BP507 if this link does not work in your country go to your Amazon store and search for downloader app)

Link between device, app and your ulango.tv account
When the app UlangoTV is started, an authorization check is performed first. The basis for this is a unique device-specific identifier (MAC). This is usually detected automatically if the device and the browser used for the login are in the same network (LAN / WLAN behind the shared router)
If the device with its MAC is not yet known, then it is checked whether an account is currently logged in with the same external IP address as the new device. If that is the case then the device is automatically connected to the account.

In exceptional cases, it may happen that the device is in a different network. In these cases, the assignment can be made using a 4-digit number, which can be seen on the start page in the app above, and which must be entered in the device page in the account on the website.

It is important to know that the app must be compatible with the service used: UlangoTV+ EPG-IPTV for Premium Plus and UlangoTV Free IPTV for the free version.